Cisco Systems Cisco 12008 manual RP Alphanumeric LEDs Partial Faceplate View

Starting the System and Observing Initial Conditions

Figure 4-1 RP Alphanumeric LEDs (Partial Faceplate View)

PROCESSOR

H10780

Upper alphanumeric LED display (four digits)

Lower alphanumeric LED display (four digits)

Table 4-1	Typical Contents of the RP Alphanumeric LEDs
LED Display	Meaning	Source
MROM	The MBus microcode begins to execute; nnnn is the	MBus
nnnn	microcode version number. For example, microcode	controller
	version 1.17 would display as 0117.1 This display might
	not be visible, since it occurs briefly.
LMEM	Low memory on the RP is being tested.	RP rommon
TEST
MEM	The size of main memory on the RP is being discovered.	RP rommon
INIT
RP	The system is operational and ready to execute basic IOS	RP rommon
RDY	commands at the ROM monitor prompt (rommon>).
RP	A valid Cisco IOS image is running.	RP IOS
UP
MSTR	The RP is enabled and recognized as the system master.	RP IOS
RP	A valid Cisco IOS image is running.

1. The version of MBus microcode running on your system might be different.

Observing System Startup and Performing a Basic Configuration 4-5