Cisco 12008 Gigabit Switch Router Installation and Configuration Guide
4-64
The Cisco Information Packet that shipped with your router.
Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated monthly. Therefore, it might be more up to date than printed documentation. To order additional copies of the Documentation CD-ROM, contact your local sales representative or call customer service. The CD-ROM package is available as a single package or through an annual subscription.
The section entitled “Obtaining Documentation.”
Customer Service at 800 553-6387 or 408 526-7208. Customer Service hours are 5:00 a.m. to 6:00 p.m. Pacific time, Monday through Friday (excluding company holidays). You can also send e-mail to cs-rep@cisco.com.
The Documentation CD-ROM.
What to Do Next?
When a block of Flash memory is locked, it cannot be written to or erased. Any attempt to do so will consistently fail at the blocked location.
What to Do Next?
After you have installed the Cisco 12008, checked all external connections, turned on system power, allowed the system to boot up, and minimally configured the system, you might need to perform additional configuration tasks. For more detailed information about configuring the router and its interfaces, refer to the publications listed in the following section.
Note For additional information about the Cisco 12000 series line cards, refer to the individual line card configuration note(s) for your installed line cards.
If You Need More Configuration Information
Additional information about Cisco IOS software is available from the following sources:
Page 248
Image 248
Cisco Systems Cisco 12008 manual