Observing System Startup andPerforming a Basic Configuration 4-65
If You Need More Configuration Information
For systems with Cisco IOS Release 11.2(8)GS or later, refer to the following modular
configuration and command reference publications, as appropriate, for your system
configuration:
Configuration Fundamentals Configuration Guide
Configuration Fundamentals Command Reference
Wide-Area Networking Configuration Guide
Wide-Area Networking Command Reference
Network Protocols Configuration Guide, Parts 1, 2, and 3
Network Protocols Command Reference, Parts 1, 2, and 3
Configuration Builder Getting Started Guide
Troubleshooting Internetworking Systems
Debug Command Reference
System Error Messages
Cisco IOS Software Command Summary
Cisco Management Information Base (MIB) User Quick Reference
For additional line card interface configuration information, refer to the following
publications:
The configuration note Quad OC-3c/STM-1c Packet-Over-SONET Line Card
Installation and Configuration (document num be r 78-4333-02) that shipped with
your Quad OC-3c/STM-1c POS line card
The configuration note OC-12c/STM-4c Packet-Over-SONET Line Card
Installation and Configuration (document num be r 78-4341-02) that shipped with
your OC-12c/STM-4c POS line card
The configuration note OC-12c/STM-4c Asynchronous Transfer Mode Line Card
Installation and Configuration (document num be r 78-4344-02) that shipped with
your OC-12c/STM-4c ATM line card