C H A P T E R 2

Preparing for Installation

This chapter provides specific information about preparing your site for installation of the Cisco 12008 router. Included are safety guidelines, specific preparatory information, and tools and parts required to ensure successful installation of your router.

The shipping package for Cisco 12000 series routers is engineered to reduce the potential of product damage associated with routine material handling experienced during shipment. To minimize potential damage to the product, transport these products in their Cisco- specified packagings. Failure to do so may result in damage to the router or degradation of its performance. Also, do not remove the GSR or Internet Router from its shipping container until you are ready to install it. The router should always be transported or stored in an upright position. Keep the router in the shipping container until you have determined where you will install it.

To unpack the router, use the document entitled Cisco 12008 Gigabit Switch Router System Packing and Unpacking Instructions that was shipped with your router. Inspect all items for shipping damage; if any damage is evident, immediately contact a Cisco customer service representative.

The following sections are included in this chapter:

Safety Recommendations

Site Requirements Guidelines

System Ground Connection Guidelines

Site Wiring Guidelines

Installation Tools Required

Unpacking the Cisco 12008

Preparing for Installation 2-1

Page 103
Image 103
Cisco Systems Cisco 12008 manual Preparing for Installation