Cisco Systems Cisco 12008 manual Press Return

Performing Other Configuration Tasks

Configuration Summary enabled are: console baud: 9600

boot: image specified by the boot system command

or default to: cisco2-grp

do you wish to change the configuration? y/n [n]

You must reset or power cycle for the new config to take effect

Step 7 Initialize the router by entering the initialize command at the ROM monitor prompt:

rommon 1> i

The router power cycles, the software configuration register is set to ignore the configuration file, and the router boots the system image and displays the system configuration dialog:

--- System Configuration Dialog ---

.

.

.

Step 8 Enter no in response to the system configuration dialog prompts until the following instruction is displayed:

Press RETURN to get started!

Step 9 Press Return.

After the interface configuration information is displayed, the user EXEC mode prompt appears:

Router>

Step 10 Issue the enable command at the user EXEC mode prompt to enter the privileged EXEC mode:

Router> enable

Router#

Observing System Startup and Performing a Basic Configuration 4-45