Cisco Systems Cisco 12008 manual Mrom

Starting the System and Observing Initial Conditions

Table 4-2	Typical Contents of the Line Card Alphanumeric LEDs
Line Card LED
Display	Meaning	Source
MROM	The MBus microcode begins to execute; nnnn is the	MBus controller

nnnnmicrocode version number. For example, microcode version 1.17 would display as 0117.1 This display

might not be visible, since it occurs briefly.

LMEM	Low memory on the line card is being tested.	LC rommon
TEST
MEM	The size of main memory on the line card is being	LC rommon
INIT	discovered.
ROMI	The ROM image is being loaded into line card	RP IOS
GET	memory.
FABL	The line card is waiting for the loading of the fabric	RP IOS
WAIT	downloader.2
FABL	The fabric downloader is being loaded into line card	RP IOS
DNLD	memory.
FABL	The fabric downloader is being launched.	RP IOS
STRT
FABL	The fabric downloader has been launched and is	RP IOS
RUN	running.
IOS	The Cisco IOS software is being downloaded into	RP IOS
DNLD	line card memory.
IOS	The Cisco IOS software is being launched.	RP IOS
STRT
IOS	The Cisco IOS software is running.	RP IOS
UP
IOS	The line card is enabled and ready for use.	RP IOS
RUN

1.The version of MBus microcode running on your system might be different.

2.The fabric downloader loads the Cisco IOS software image onto the line card.

Observing System Startup and Performing a Basic Configuration 4-7