Sharp XR-20S, XR-10X Adjusting the Projected Image “SCR - ADJ” menu, 1Setting the Resize Mode

Adjusting the Projected Image (“SCR - ADJ” menu)

Menu operation n Page 37

	Picture	SCR - ADJ	PRJ - ADJ		Help
1	Resize		Normal
2	Image Shift	0
3	Keystone	0
4	Auto Keystone		Off
	OSD Display		On
5	Background		Logo
6	Setup Guide		On
7	PRJ Mode		Front
8	Language		English
	SEL./ADJ.	ENTER		END

*“Auto Keystone” can be operated only when using XG-MB55X or XR-20X.

1Setting the Resize Mode

Note

•For details of the Resize mode, see pages 32 and 33.

•You can also press HRESIZE on the remote control to set the resize mode. (See page 32.)

2Adjusting the Image Position

You can move the projected image vertically.

O button Q button

3Keystone Correction

When the image is projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally. The function for correcting trap- ezoidal distortion is called Keystone Correction.

a When using XG-MB55X or XR-20X

For Auto Keystone Correction

Set “Auto Keystone” on the “SCR - ADJ” menu to “On”.

For Manual Keystone Correction

Set “Auto Keystone” on the “SCR - ADJ” menu to “Off”, select “Keystone”, and then adjust with the slide bar.

Manual Correction

Q or P button O or R button

Note

•You cannot set this item when “Resize” is set to “Normal”.

a When using XR-20S, XR-10X or XR-10S

Select “Keystone” on the “SCR-ADJ” menu and adjust with the slide bar.

See page 31 for details of Keystone Correction.

Note

•The Keystone Correction can be adjusted up to an angle of approximately ±13 degrees with the “Auto Keystone” and up to an angle of approximately ±13 degrees with the manual “Keystone” (when “Resize” is set to “Normal”).

Features Useful

41