Sharp XR-10X Adjust the projected image with the Setup Guide, Correct trapezoidal distortion

4.Adjust the projected image with the Setup Guide

1After the projector turns on, the Setup Guide appears. (When “Setup Guide” is set to “On”. n page 42)

2Follow the steps in the Setup Guide and adjust the focus, screen size, and height (angle).

3After adjusting the focus, height (angle) and screen size, press TENTER to finish the Setup Guide.

_P. 28

5.Turn the computer on

6.Select the INPUT mode

Select the “INPUT 1” using the INPUT button on the projector or C INPUT 1 on the remote

control.

On the On the remote On-screen display (RGB) projector control

•When pressing the INPUT button on the projector, input mode switches in the following order: INPUT1INPUT2INPUT3INPUT4

•When using the remote control, press the CINPUT 1/CINPUT 2/DINPUT 3/EINPUT

4 button to switch the INPUT mode. _P. 30

7. Correct trapezoidal distortion

Correcting trapezoidal distortion using the Keystone Correction. (Keystone Correction functions automatically on XG-MB55X/XR-20X.)

On the projector

Shrinks	Shrinks
upper side.	lower side.

On the remote control

_P. 31

8. Turn the Power off

Press the STANDBY/ON button on the projector or the STANDBY button on the remote control, and then press the button again while the confirmation message is displayed, to put the projector into standby mode.

On the	On the remote	On-screen Display
projector	control

• Unplug the power cord from the AC outlet after the cooling fan stops.

_P. 27

Quick Start

17