FUNCTIONS & CONTROLS CONT.
17)FORWARD SKIP BUTTON - Use this button to skip to the next track on the CD.
18)FLIP FLOP - Use a std. mini plug (stereo) to plug in Side 1 to Side 2. Set both sides of the CD player to single mode on the control. When Disc 1 ends the CD player will automatically change to Disc 2 and when Disc 2 ends it will return to Disc 1, etc.
19)PLAYER 2 REMOTE CONNECTOR - Connect to player 2 connector on transport assembly.
20)PLAYER 1 REMOTE CONNECTOR - Connect to player 1 connector on transport assembly.
21)PLAYER 2 MINI CONNECTOR FOR Q START - Connect to Q Start mixer B connector on enabled American DJ mixers.
22)PLAYER 1 MINI CONNECTOR FOR Q START - Connect to Q Start mixer A connector on enabled American DJ mixers.
C.LCD (figure 5)
1) PLAY INDICATOR ( ) - The PLAY indicator lights during playback.
2)PAUSE INDICATOR ( 
) - The PAUSE indicators light during pause or cue mode.
3)CUE INDICATOR - The CUE indicator lights during CUE mode or PAUSE mode, flashes when CUE point is changed.
4)ELAPSED INDICATOR - It indicates that the time shown on the display is the elapsed time.
5)TOTAL INDICATOR - It indicates that the time shown on the display is the elapsed time.
6)BAR INDICATOR - These ten indicators provide a visual display of the approximate position of the pickup within the current track.
7)REMAIN INDICATOR - It indicates that the time shown on the display is the remaining time of the playing track.
8)SINGLE INDICATOR - When the indicator light, playback will stop at the beginning of the track.
9)PROGRAM INDICATOR - The PROGRAM indicator lights when program mode is set.
10)PITCH INDICATOR - When the indicator lights, the pitch adjustment is enabled.
11)LOOP INDICATOR - When in loop mode this indicator will glow.
12)TRACK INDICATOR - Indicates the current track that is playing, cued, or in pause mode.
13)MINUTES INDICATOR - Display current minutes.
14)SECONDS INDCTOR - Displays current seconds.
15)FRAME INDICATOR - Displays current frames.
16)PITCH PERCENTAGE - This displays the amount of pitch being applied to the track. This is adjusted by the PITCH SLIDER.
PREPARATIONS
1. Check that the carton contains the following items: |
| |
1) | Main unit | 4) |
2) | Control unit | 5) |
3) | Operating instructions (this booklet) | 6) |
Two sets of RCA cables.
Two Control cords (6 feet / 1.8 meters) Two Mini Connectors for "Q" Start.
2.Installing the Units
Mount the units onto your console or rack with 19" EIA rack rails.
Fig. 6
CAUTION:
•The player will work normally when the main unit is mounted with the front panel within
15 degrees of the vertical plane. If the unit is tilted excessively, discs may not be loaded or unloaded properly. (Figure 6)
Fig. 7
•The control panel's LCDs are designed to be clearly visible within the angles shown in Figure 7. Mount the control unit so that the visual angle is within this range.
American DJ® AUDIO •
