IMPORTANT SAFETY INSTRUCTIONS

?WARNING?

To reduce the risk of fire, electrical shock, or injury when using your freezer, follow these basic precautions:

?Read all instructions before using the freezer.

?DANGER or WARNING: Risk of child entrapment.

Child entrapment and suffocation are not problems of the past. Junked or abandoned freezers are still dangerous… even if they will “just sit in the garage a few days.

?Before you throw away your old freezer: Take off the door. Leave the shelves in place so that children may not easily climb inside.

?Never allow children to operate, play with, or crawl inside the freezer.

?Never clean freezer parts with flammable fluids. The fumes can create a fire hazard or explosion.

?Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other freezer. The fumes can create a fire hazard or explosion.

-Save these instructions-

INSTALLATION INSTRUCTIONS

Before Using Your Freezer

?Remove the exterior and interior packing.

?Check to be sure you have all of the following parts:

?1 Storage Basket

?1 Drain Plug

?1 Instruction Manual

?1 Plastic Scraper

?Before connecting the freezer to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

?Clean the interior surface with lukew arm water using a soft cloth.

Installing Your Freezer

?This appliance is designed to be free standing only, and should not be recessed or built-in.

?Place your freezer on a floor that is strong enough to support the freezer when it is fully loaded.

?Allow 5 inches of space between the back and sides of the freezer, which allows the proper air circulation.

?Locate the freezer away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat s ources may increase electrical consumption. Extreme cold ambient temperatures may also cause the freezer not to perform properly.

?Avoid locating the freezer in moist areas.

?Plug the freezer into an exclusive, properly installed -grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.

?After plugging the appliance into a wall outlet, allow the unit to cool down for 2~3 hours before placing food in the freezer compartment.

8

Page 8
Image 8
Avanti CF61 Important Safety Instructions, Installation Instructions, Before Using Your Freezer, Installing Your Freezer

CF61 specifications

The Avanti CF61 is a sophisticated compact car that has gained attention in the automotive market for its blend of performance, efficiency, and modern design. As a contender in the compact segment, it aims to provide a balanced approach to both city driving and longer journeys, making it an attractive option for a diverse range of consumers.

One of the standout features of the Avanti CF61 is its sleek, aerodynamic body design. With smooth lines and a bold front grille, the vehicle conveys a sense of modernity and sophistication. The design not only enhances aesthetic appeal but also contributes to improved fuel efficiency by reducing air resistance. Furthermore, the lightweight construction of the CF61 allows for better handling and maneuverability, making it an ideal choice for urban environments.

Under the hood, the CF61 offers a choice of efficient powertrains. Models typically include a turbocharged four-cylinder engine that delivers a commendable balance of power and fuel economy. This engine is designed to provide responsive acceleration, ensuring a dynamic driving experience without sacrificing efficiency. The incorporation of advanced technologies such as variable valve timing enhances performance while keeping emissions low.

Inside, the Avanti CF61 is equipped with a host of modern technologies aimed at enhancing driver and passenger comfort. The cabin features high-quality materials and a user-friendly layout, with emphasis on ergonomics. Key technological advancements include an intuitive infotainment system with a touchscreen interface, smartphone integration capabilities, and premium audio options. Additionally, advanced safety features such as adaptive cruise control, lane-keeping assist, and a rearview camera contribute to a secure driving experience.

The CF61 also prioritizes connectivity with features like Bluetooth and USB ports, allowing drivers to stay connected on the go. Furthermore, the spacious interior provides ample room for passengers and cargo, ensuring practicality for everyday use.

Overall, the Avanti CF61 presents a compelling option for those in search of a compact vehicle that marries style, efficiency, and cutting-edge technology. Its combination of performance-oriented features and contemporary design make it a strong contender in a crowded marketplace, appealing to both young professionals and families alike. With its focus on sustainability and user experience, the CF61 is positioned to meet the demands of today's consumers, making it a noteworthy addition to the automotive landscape.