4 | Configuring the TX 4000 board |
Using the configuration utility
After you install the TX 4000 board and the NaturalAccess Signaling Software, you must assign a CP number to each TX 4000 board. Verify that you have completed the steps described in the installation summary on page 16 before you proceed to assigning a CP number on page 22.
To assign a CP number, you will use the txcpcfg utility. Depending on the operating environment, the txcpcfg utility is located in one of the following directories:
Operating system | Directory |
|
|
Windows | Program Files\Dialogic\tx\bin\ |
|
|
UNIX | /opt/dialogic/tx/bin/ |
|
|
txcpcfg enables you to perform the following types of changes to the configuration:
•Assign a CP number
•Add a board
•Change a CP number
•Move a board
•Remove a board
•Save configuration changes
For more information about txcpcfg, refer to the Dialogic® TX Series SS7 Boards TX Utilities Manual.
Dialogic Corporation | 21 |
