Configuring the TX 4000 board | TX 4000 PCI SS7 Network Interface Board Installation Manual |
Removing a board
Complete the following steps to remove a TX board from the system:
Step
Action
1
2
3
4
Power down the system if it is running.
Remove the TX 4000 board from the slot.
Power up the system.
Verify the configuration change by entering the following command:
txcpcfg
For example, if you remove a TX board with a CP number of 2, no configuration information for the removed board is displayed, as in the following example:
Bus | Slot | CP Number | CP Model | |
2 | 2 | 1 | TX | 4000 |
2 | 8 | 3 | TX | 4000 |
5
Save the configuration changes.
In a Windows system, configuration changes are saved automatically. In a UNIX system, configuration changes are deleted when you restart the system. Save the changes by editing the cpcfg file as described in Saving configuration changes on page 27.
26 | Dialogic Corporation |
