![](/images/new-backgrounds/1192221/19222119x1.webp)
Overview of the TX 4000 board | TX 4000 PCI SS7 Network Interface Board Installation Manual |
The following illustration shows the TX 4000 board:
Ethernet | T1/E1 trunk | T1/E1 | |
status | |||
connectors | connectors | ||
LEDs | |||
|
|
Ethernet
MAC/PHY
chips
S3 DIP
switch
Framer
Host
bridge
PCI to 60x
bridge
8260 Power
QUICC II controller
T8100A
H.100
interface
The TX 4000 board provides:
•PCI bus connectivity
PCI to MPX
bridge
7457 RISC
microprocessor
with fan
H.100 bus connector
S2 DIP switch
Each board is designed to reside in a single PCI bus slot. Each board contains a universal (5.0 V or 3.3 V signaling) PCI bus interface that is compliant with the PCI Local Bus Specification, Revision 2.2. The PCI interface is a 33/66 MHz, 32- bit master/target device.
•H.100 bus connectivity
The TX 4000 board fully supports the H.100 bus specification. The H.100 bus enables boards to share data and signaling information with other boards on the H.100 bus. For example, you can connect two or more TX 4000 boards for applications that perform
The H.100 interface supports a full mode stream configuration on the H.100 bus with 32 streams at 8 MHz each. Each stream provides 128 timeslots for a total of 4096 timeslots.
10 | Dialogic Corporation |