Verifying the installation | TX 4000 PCI SS7 Network Interface Board Installation Manual |
Ethernet LEDs
The TX 4000 board provides two LEDs to indicate the status of each Ethernet interface. The LEDs are located in the
Ethernet 1 LIN K/AC T LED (green) 
Ethernet 1 1 00 LED (green) 
Eth e rne t 2 LIN K/AC T LED (green) 
E th e r n e t 2 10 0 LED (green) 
The following table describes the functionality of each LED:
LED | Description |
|
|
LINK/ACT
Indicates the status of the Ethernet link. When the Ethernet link has established link integrity, the LED is on and steady. It also indicates the transmitting and receiving activity on the link. When activity is present on the Ethernet link, the LED flickers.
100
Indicates the data rate of the Ethernet link. When the LED is on, the data rate is 100 Mb. When the LED is off, the data rate is 10 Mb. The LED is used only when a reliable Ethernet connection has been established. (The LINK/ACT LED is on.)
38 | Dialogic Corporation |
