1 Introduction
The Dialogic® TX 4000 PCI SS7 Network Interface Board Installation Manual explains how to perform the following tasks:
•Install the TX 4000 PCI SS7 Network Interface board
•Configure the TX 4000 PCI SS7 Network Interface board
•Establish network connections
•Verify the installation
This manual targets developers of telephony and voice applications who use TX 4000 boards with Dialogic® NaturalAccess™ Signaling Software. This manual defines telephony terms where applicable, but assumes that the reader is familiar with telephony concepts, switching, and the C programming language.
Note: The product(s) to which this document pertains is/are among those sold by NMS Communications Corporation (“NMS”) to Dialogic Corporation (“Dialogic”) in December 2008. Certain terminology relating to the product(s) has been changed, whereas other terminology has been retained for consistency and ease of reference. For the changed terminology relating to the product(s), below is a table indicating the “New Terminology” and the “Former Terminology”. The respective terminologies can be equated to each other to the extent that either/both appear within this document.
Former terminology | Current terminology |
|
|
NMS SS7 | Dialogic® NaturalAccess™ Signaling Software |
Natural Access | Dialogic® NaturalAccess™ Software |
Dialogic Corporation | 7 |
