!'SPECIFICATIONS
Type
Heads
Motors
Tape Speed
Variable (PLAY)
Fast Forward,
Rewind Time
Flecording Bias Overall S/N Ratio
(at 3% THD red,iF Overall Frequency
Response
Channel Separation
Crosstalk
Wow & Flutter
Inputs
Line
Outputs
" Line
Headphone
Power supply Power Consumption Dimensions
Weight
Installation _
•Vertical tape loading;
Recording/playback head (amorphous) X 1 Erase head
Capstan (DC servo motor) × 1
Reel (DC motor) x 1
4.8cm/sec. (FIX) Approx. _+12%
Approx. 110 sec. with a
Dolby_ NR on" more than 74 dB (CCIR/ARM)
25N19,000 Hz 4:3 dB (at
More than 65 dB (at 1 kHz)
0.055% WRMS (JIS method), _+0.14% w. peak
80 mV
775 mV (0 dB) output level at maximum (with 47 kohm load, recorded level of 200 pwb/mm)
1.2mW output level at maximum (optimum load impedance
8 ohmN1.2 kohm)
Voltage is shown on rating label 16W
482 (W) X 134 (H) ;< 275 (D) mm
4.7 kg
iN Above specifications and design styling are subject to change for improvement.
iN Dolb¥ noise reduction and HX Pro headroom extension manufactured
under licence from bolby Laboratories Licensing Corporation. HX Pro originated by Band & Olufsen.
"DOLBY", the
Best results will be obtained with use of DENON DX and HD Series cassette I
tapes. | 1 |