RADIUS
Avaya Wireles s AP-4/5/6 Us er’s Guide 4 -165
Configuring RADIUS Accounting
Follow these steps to enable RADIUS accounting on the AP:
NOTE:
For RADIUS accounting to work, you must first enable RADIUS
authentication as follows:
1. In the RADIUS Auth screen, place a check mark in the box
labeled Enable RADIUS MAC Access Control.
2. Place a check mark in the box labeled Enable Primary RADIUS
Authentication Server.
3. If you want to configure a back-up RADIUS server, place a check
mark in the box labeled Enable Back-up RADIUS Authentication
Server.
4. Enter the time, in seconds, each client session may be active
before being automatically re-authenticated in the Authorization
Lifetime field. The Authorization Lifetime default is 0
(reauthentication is disabled). The configurable range is from 900
seconds to 43200 seconds.
5. Select a MAC Address Format Type. This should correspond to
the format in which the clients’ 12-digit MAC addresses are listed
within the RADIUS server. Available options include:
— Dash delimited: dash between each pair of digits:
xx-yy-zz-aa-bb-cc
— Colon delimited: colon between each pair of digits:
xx:yy:zz:aa:bb:cc)