Additional Hardware Features
2-52 Avaya Wireless AP-4/ 5/6 User’s Guide
15. Replace the front cover.
16. Replace the cable cover.
17. Turn on the AP.
Ceiling Mount
Follow these steps to mount the AP to a ceiling:
1. Unplug the Access Point’s power supply, if necessary.
2. Use a Phillips screwdriver to attach the metal base to the
underside of the AP, if necessary. SeeAttach the Metal Base for an
illustration.
3. Feed a mounting screw through each of the four rubber feet. The
AP comes with four 3.5 mm x 40 mm pan-head screws.
4. Remove the screws from the rubber feet.
5. Turn the AP upside down position the base against the ceiling
where you want to mount the unit.
6. Mark the center of the four mounting holes in the rubber feet.
7. Set the AP aside and drill a hole at each of the locations you
marked above. Each hole should be wide enough to hold a
mounting plug (which is 6 mm x 35 mm).
8. Insert a plug into each hole. The AP comes with four 6 mm x 35
mm plugs.
9. Insert the screws into the holes you made previously in the rubber
feet.