Filtering

Follow these steps to configure the Ethernet Protocol Filter:

1.Select the interface or interfaces that will implement the filter from the Ethernet Protocol Filtering drop-down menu.

Ethernet: Packets are examined at the Ethernet interface

Wireless: Packets are examined at the Wireless interface

All Interfaces: Packets are examined at both interfaces

Disabled: The filter is not used

2.Select the Filter Operation Type.

If set to Passthru, only the enabled Ethernet Protocols listed in the Filter Table will pass through the bridge.

If set to Block, the bridge will block enabled Ethernet Protocols listed in the Filter Table.

Avaya Wireless AP-4/5/6 User’s Guide

4-83

Page 181
Image 181
Avaya AP-6, AP-4, AP-5 manual Select the Filter Operation Type