Avaya AP-5, AP-4, AP-6 manual Configuring RAD

Configure Multiple SSID/VLAN/Security Mode Entries

Configuring RAD

Perform this procedure to enable RAD and define the Scan Interval.

The RAD screen also displays the time of the last scan and the number of new access points detected in the last scan.

1.Enable the Security Alarm Group. Select the Security Alarm Group link from the RAD screen. Configure a Trap Host to receive the list of access points detected during the scan.

2.Click Configure > Security > RAD.

3.Enable RAD by checking Enable Rogue AP Detection.

4.Enter the Scan Interval.

The Scan Interval specifies the time period in minutes between scans and can be set to any value between 15 and 1440 minutes.

5.Click OK.

The results of the RAD scan be viewed in the Status page in the HTTP interface.

Avaya Wireless AP-4/5/6 User’s Guide 4-153