Initialization

ScanTool Instructions

Follow these steps to install ScanTool, initialize the Access Point, and perform initial configuration:

1.Locate the unit’s Ethernet MAC address and write it down for future reference. The MAC address is printed on the product label. Each unit has a unique MAC address, which is assigned at the factory.

2.Confirm that the AP is connected to the same LAN subnet as the computer that you will use to configure the AP.

3.Power up, reboot, or reset the AP.

Result: The unit requests an IP Address from the network DHCP server.

4.Insert the Installation CD into the CD-ROM drive of the computer that you will use to configure the AP.

Result: The installation program will launch automatically.

5.Follow the on-screen instructions to install the Access Point software and documentation.

Avaya Wireless AP-4/5/6 User’s Guide

2-19

Page 49
Image 49
Avaya AP-6, AP-4, AP-5 manual ScanTool Instructions