Avaya AP-4, AP-6, AP-5 manual Recovery Procedures

Recovery Procedures

7.Enter the network’s Subnet Mask in the field provided.

8.Enter the network’s Gateway IP Address, if necessary. You may need to contact your network administrator to get this address. You should only need to enter the default gateway address if the Access Point and the TFTP server are separated by a router.

9.Enter the IP address of your TFTP server in the field provided.

10.Enter the Image File Name (including the file extension). Enter the full directory path and file name. If the file is located in the default TFTP directory, you need enter only the file name.

11.Click OK.

—Result: The Access Point will reboot and the download will begin automatically. You should see downloading activity begin after a few seconds within the TFTP server’s status screen.

12.Click OK when prompted that the device has been updated successfully to return to the Scan List screen.

13.Click Cancel to close the ScanTool.

14.When the download process is complete, configure the AP as described in Getting Started and Advanced Configuration.

7-20 Avaya Wireless AP-4/5/6 User’s Guide