Avaya AP-5, AP-4, AP-6 manual Wireless Distribution System WDS for more

	Interfaces
Parameter	Description
Auto Channel	The AP scans the area for other
Select	Access Points and selects a free or relatively
	unused communication channel. This helps
	prevent interference problems and increases
	network performance. By default this feature
	is enabled; see 802.11b Channel
	Frequencies for a list of Channels. However,
	if you are setting up a Wireless Distribution
	System (WDS), it must be disabled. See
	Wireless Distribution System (WDS) for more
	information.
Frequency	When Auto Channel Select is enabled, this
Channel	field is read-only and displays the
	Access Point’s current operating channel.
	When Auto Channel Select is disabled, you
	can specify the Access Point’s operating
	channel. If you decide to manually set the
	unit’s channel, ensure that nearby devices do
	not use the same frequency (unless you are
	setting up a WDS). Available Channels vary
	based on regulatory domain. See 802.11b
	Channel Frequencies.
	3 of 9

Avaya Wireless AP-4/5/6 User’s Guide 4-33