Avaya AP-5, AP-4, AP-6 manual Disable Vlan Management, MAC Access, Click Configure Vlan

Configure Multiple SSID/VLAN/Security Mode Entries

! CAUTION:

Once a VLAN Management ID is configured and is equivalent to one of the VLAN User IDs on the AP, all members of that User VLAN will have management access to the AP. Be careful to restrict VLAN membership to those with legitimate access to the AP.

1.Click Configure > VLAN.

2.Set the VLAN Management ID to use the same VLAN ID as one of the configured SSID/VLAN pairs. See Typical User VLAN Configurations for details.

3.Place a check mark in the Enable VLAN Protocol box.

Disable VLAN Management

1.Click Configure > SSID/VLAN/Security.

2.Remove the check mark from the Enable VLAN Protocol box to disable all VLAN functionality.

MAC Access

The MAC Access tab allows you to build a list of stations, identified by their MAC addresses, authorized to access the network through the AP. The list is stored inside each AP within your network. Note that you must reboot the AP for any changes to the MAC Access Control Table to take effect.

Avaya Wireless AP-4/5/6 User’s Guide 4-147