Avaya AP-4, AP-6, AP-5 manual Result of show ip CLI Command

Recovery Procedures

3.Press the RESET button on the AP (see RELOAD and RESET Buttons to identify the location of the RESET button).

Result: The terminal display shows Power On Self Tests (POST) activity, and then displays a CLI prompt, similar to the example below. This process may take up to 90 seconds.

[Device-Name]>Please enter password:

4. Enter the CLI password (default is public).

Result: The terminal displays a welcome message and then the CLI Prompt:

[Device-Name]>

5. Enter show ip. Result: Network parameters appear:

Figure 7-2. Result of “show ip” CLI Command

6.Change the IP address and other network values using set and reboot CLI commands, similar to the example below (use your own IP address and subnet mask). Note that IP Address Type is set to Dynamic by default. If you have a DHCP server on your

7-26 Avaya Wireless AP-4/5/6 User’s Guide