Avaya AP-6, AP-4, AP-5 manual Iapp Commands, Iapp Parameters

IAPP Commands

IAPP Commands

NOTE:

These parameters configure the Inter Access Point Protocol (IAPP) for roaming. Leave these settings at their default value unless a technical representative asks you to change them.

IAPP Parameters

Name	Type	Values	Access	CLI Parameter
IAPP	Group	N/A	R	iapp
IAPP Status	Integer	enable (default)	RW	iappstatus
		disable
Periodic Announce	Integer	80	RW	iappannint
Interval (seconds)		120 (default)
		160
		200
Announce	Integer	2 seconds	R	iappannresp
Response Time
Handover Time-out	Integer	410 ms	RW	iapphandtout
		512 ms (default)
		614 ms
		717 ms
		819 ms
				1 of 2

A-60 Avaya Wireless AP-4/5/6 User’s Guide