Additional Hardware Features
2-48 Avaya Wireless AP-4/ 5/6 User’s Guide
Mounting Options
There are three mounting options for the AP, described below.
Desktop Mount
This is the standard installation for the AP. See Hardware Installation for
instructions.
Wall Mount
Follow these steps to mount the AP on a wall:
1. Identify the location where you intend to mount the unit.
NOTE:
For best results, mount the unit vertically. In other words, the
antenna should be pointing up or down but not sideways.
2. Unplug the Access Point’s power supply, if necessary.
3. Use a Phillips screwdriver to remove the metal base from the
underside of the AP, if necessary.
4. Press down on the cable cover lock to release the cable cover.
See Unlock the Cable Cover for an illustration.
5. Remove the cable cover from the unit. See Remove Cable Cover
for an illustration.