SNMP Commands
A-86 Avaya Wireless AP-4/5/6 User ’s Guide
SNMP Trap Host Table Parameters
When creating table entries, you specify the argument name followed by
an argument value. The CLI applies default values to the omitted
arguments. Due to the nature of the information, the only argument that
can be omitted is the “comment” argument.
NOTE:
Up to 10 entries can be added to the SNMP Trap Host Table.
Name Type Values Access CLI Parameter
SNMP Trap Host
Table
Table N /A R snmptraphosttbl
Table Index Integer User Defined N/A index
IP Address IpAddress User Defined RW ipaddr
Password DisplayString User Defined (up to
64 characters)
W passwd
Comment
(optional)
DisplayString User Defined (up to
254 characters)
RW cmt
Status (optional) Integer enable (default)
disable
delete
RW status