Avaya AP-6 Adding TCP/UDP Port Filters, Click Add under the TCP/UDP Port Filter Table heading

Filtering

Adding TCP/UDP Port Filters

1.Place a check mark in the box labeled Enable TCP/UDP Port Filtering.

2.Click Add under the TCP/UDP Port Filter Table heading.

3.In the TCP/UDP Port Filter Table, enter the Protocol Names to filter.

4.Set the destination Port Number (a value between 1 and 65535) to filter. See the IANA Web site at http://www.iana.org/assignments/port-numbersfor a list of assigned port numbers and their descriptions.

5.Set the Port Type for the protocol: TCP, UDP, or both (TCP/UDP).

6.Set the Interface to filter:

—Wireless

—Ethernet

—All interfaces

—No interfaces

7.Click OK.

Avaya Wireless AP-4/5/6 User’s Guide 4-95