Avaya AP-4, AP-6, AP-5 manual Automatic Configuration

Management

Setting	Description
Serial Parity	This is a read-only field and displays the
	number of parity bits used in serial
	communication (no parity bits by default).
Serial Stop Bits	This is a read-only field that displays the
	number of stop bits used in serial
	communication (1 stop bit by default).

NOTE:

The serial port bit configuration is commonly referred to as 8N1.

2 of 2

Automatic Configuration

The Automatic Configuration feature which allows an AP to be automatically configured by downloading a specific configuration file from a TFTP server during the boot up process.

Automatic Configuration is disabled by default. The configuration process for Automatic Configuration varies depending on whether the AP is configured for dynamic or static IP.

When an AP is configured for dynamic IP, the Configuration filename and the TFTP server IP address are contained in the DHCP response when the AP gets its IP address dynamically from the DHCP server. When

4-76 Avaya Wireless AP-4/5/6 User’s Guide