Avaya AP-5, AP-4, AP-6 manual Using Telnet to Log in to the AP

Accessing the AP CLI

2.Under File -> Properties -> Settings -> ASCII Setup, enable the Send line ends with line feeds option.

Result: HyperTerminal sends a line return at the end of each line of code.

3.Enter the CLI password (default is public).

NOTE:

Avaya recommends changing all default passwords immediately. See the following sections for information on how to change the default passwords:

—CLI password, see passwd.

—SNMP passwords (read, read-write, and SNMPv3 authentication and privacy), see SNMP Commands.

—HTTP password, see HTTP and HTTPS Commands.

Using Telnet to Log in to the AP

The CLI commands can be used to access, configure, and manage the AP using Telnet. Follow these steps:

1.Confirm that your computer’s IP address is in the same IP subnet as the AP.

A-22 Avaya Wireless AP-4/5/6 User’s Guide