Avaya AP-5, AP-4, AP-6 manual Rogue Access Point Detection RAD Parameters

				RAD Commands
Rogue Access Point Detection (RAD) Parameters
Name	Type	Values	Access		CLI Parameter
Rogue Access	Group	N/A	R		rad
Point Detection
(RAD)
Status	Integer	enable	RW		radstatus
		disable (default)
Scan Interval	Integer	15-1440 (minutes)	RW		radscanint

Syntax Examples

[Device-Name]>set radstatus enable [Device-Name]>set radscanint <15-1440>

[Device-Name]> show rad

Figure A-14. Results of “show rad” CLI command

Avaya Wireless AP-4/5/6 User’s Guide A-73