Avaya AP-6, AP-4, AP-5 manual Examples, Device-NameexitCR or quitCR or doneCR

CLI Commands

The following message is displayed every time you configure an object that requires the device to be rebooted.

[Device-Name]>set ipaddr 135.114.73.10

The following elements require reboot ipaddr

In addition to the above informational message, the CLI also provides a message as a result of the exit, quit, or done command if changes have been made to objects that require reboot. If you make changes to objects that require reboot and execute the exit command the following message is displayed:

[Device-Name]>exit<CR> OR quit<CR> OR done<CR>

Modifications have been made to parameters that require the device to be rebooted. These changes will only take effect after the next reboot.

Examples

[Device-Name]>set sysloc “Main Lobby”

[Device-Name]>set mgmtipaccesstbl 0 ipaddr 10.0.0.10 ipmask 255.255.0.0

Avaya Wireless AP-4/5/6 User’s Guide A-33