Avaya AP-5, AP-4, AP-6 manual This Appendix

The Command Line	A
Interface

In This Appendix

This section describes the AP’s Command Line (CLI) Interface. CLI commands can be used to initialize, configure, and manage the Access Point.

CLI commands may be entered in real time through a keyboard or submitted with CLI scripts. After entering commands, press the Enter key to execute the command.

The CLI is available through both the Serial Port interface and over the Ethernet interface using Telnet.

NOTE:

All CLI commands and parameters are case-sensitive.

Avaya Wireless AP-4/5/6 User’s Guide A-1