Avaya AP-4, AP-6, AP-5 manual Enable WEP Encryption

Configure Multiple SSID/VLAN/Security Mode Entries

NOTE:

If you have two or more SSIDs per interface with a security mode of None, be aware that security being applied in the VLAN is not being applied in the wireless network.

NOTE:

Some parameters on other pages must be configured for each security mode to function. RADIUS server(s) must be configured to support authentication of WPA, 802.1x or WEP clients. Encryption keys must be configured for WEP clients if mixed mode is selected.

Enable WEP Encryption

Follow these steps to set up WEP encryption on an SSID/VLAN pair:

1.Set Security Mode to WEP (if necessary).

2.Enter Encryption Key 0 only; the transmit key (the key used to encrypt outgoing data) will be automatically set to zero. Keep in mind the following:

—For 64-bit encryption, an encryption key is 10 hexadecimal characters (0-9 and A-F) or 5 ASCII characters (see ASCII Character Chart).

—For 128-bit encryption, an encryption key is 26 hexadecimal characters or 13 ASCII characters.

—For 152-bit encryption, an encryption key is 32 hexadecimal characters or 16 ASCII characters.

4-142 Avaya Wireless AP-4/5/6 User’s Guide