Avaya AP-4, AP-6, AP-5 manual Filtering, Ethernet Protocol

Filtering

8.Reboot the AP. When the AP reboots it receives the new configuration information and must reboot one additional time. If a Syslog server was configured, the following messages can be observed on the Syslog server:

—AutoConfig for Dynamic IP

—TFTP server address and configuration filename

—AutoConfig Successful

Filtering

The Access Point’s Packet Filtering features help control the amount of traffic exchanged between the wired and wireless networks. There are four sub-categories under the Filtering heading.

•Ethernet Protocol

•Static MAC

•Advanced

•TCP/UDP Port

Ethernet Protocol

The Ethernet Protocol Filter blocks or forwards packets based on the Ethernet protocols they support.

4-82 Avaya Wireless AP-4/5/6 User’s Guide