CLI Help
A-18 Avaya Wireless AP-4/5/6 User ’s Guide
Example 3b. Displaying parameters based on letter sequence
This example shows entries for parameters that start with the letter “i”.
The more letters you enter, the fewer the results returned. Notice that
there is no space between the letters and the question mark.
[Device-Name]> show ipa?
Figure A-6. Result of “show ipa?” CLI command
[Device-Name]> show iparp?
Figure A-7. Result of “show iparp?” CLI command
Example 4. Displaying prompts for successive parameters
Enter the command, a space, and then ?. Then, when the parameter
prompt appears, enter the parameter value. Result: The parameter is
changed and a new CLI line is echoed with the new value (in the first part
of the following example, the value is the IP Address of the TFTP server).