Bootloader CLI
A-8 Avaya Wireless AP-4/5/6 User’s Guide
Bootloader CLI Administrators use the CLI to control Access Point operation and monitor
network statistics. The AP supports two types of CLI: the Bootloader CLI
and the normal CLI. The Bootloader CLI provides a limited command set,
and is used to perform initial configuration of the AP when the current AP
image is bad or missing. The Bootloader CLI allows you to assign an IP
Address and download a new image. Once the image is downloaded and
running, the Access Point uses the normal CLI. This guide covers the
normal CLI unless otherwise specified.
The Bootloader CLI is accessible via the serial interface only if the AP
does not contain a software image or a download image command over
TFTP has failed.
Incorrect Password An incorrect password has been entered in
the CLI login prompt.
Download
Unsuccessful
The download operation has failed due to
incorrect TFTP server IP Address or file
name.
Upload Unsuccessful The upload operation has failed due to
incorrect TFTP server IP Address or file
name.
Error Message Description
2 of 2