Avaya AP-4, AP-6, AP-5 manual Auto Configuration Commands

Auto Configuration Commands

Auto Configuration Commands

The Auto Configuration feature automatically configures an AP by downloading a specific configuration file from a TFTP server during the boot up process.

Perform the following commands to enable and set up automatic configuration:

NOTE:

The configuration filename and TFTP server IP address are configured only when the AP is configured for Static IP. If the AP is configured for Dynamic IP, these parameters are not used and obtained from DHCP.

The default filename is config. The default TFTP IP address is 169.254.128.133 for the AP.

Avaya Wireless AP-4/5/6 User’s Guide A-41