Avaya AP-4, AP-6, AP-5 manual Type telnet IP Address of the unit

Accessing the AP CLI

NOTE:

If you have not previously configured the Access Point’s IP address and do not have a DHCP server on the network, the Access Point will default to an IP address of 169.254.128.132.

2.Go to the DOS command prompt on your computer.

3.Type telnet <IP Address of the unit>.

4.Enter the CLI password (default is public).

NOTE:

Avaya recommends changing all default passwords immediately. See the following sections for information on how to change the default passwords:

—CLI password, see passwd.

—SNMP passwords (read, read-write, and SNMPv3 authentication and privacy), see SNMP Commands.

—HTTP password, see HTTP and HTTPS Commands.

Avaya Wireless AP-4/5/6 User’s Guide A-23