Avaya AP-4, AP-5, AP-6 - page 102

Configuring the AP Using the HTTP/HTTPS Interface
4-4 Avaya Wireless AP-4/5/6 User’s Guide
5. Click the Configure button located on the left-hand side of the
screen.
Figure 4-2. Configure Main Screen
6. Click the tab that corresponds to the parameter you want to
configure. For example, click Network to configure the
Access Point’s TCP/IP settings. The parameters contained in each
of the configuration categories are described later in this chapter.
7. Configure the Access Point’s parameters as necessary. After
changing a configuration value, click OK to save the change.