Panasonic TH-42PZ800A Displaying PC Screen on TV, Select “PC”, Select the external input, Setup

Displaying PC Screen on TV

The screen of the PC connected to the TV can be displayed on the TV. You can also listen to PC sound with the audio cable connected.

•To connect PC p. 42

		INPUT	1	Select the external input
ASPECT		EXIT
	OK		2
MENU		RETURN		Select “PC”
				Input Selection
	OPTION DIRECT TV REC			AV1
				AV2
				AV3
1	2	3		AV4
				PC

HDMI1

access

select

4	5	6	HDMI2
			HDMI3

TV

7 8 9

0

VCR

ŶTo return to TV

•Corresponding signals p. 46

•If “H-freq.” or “V-freq.” is shown in red, the signals may not be supported.

•PC Audio input is via AV2 Audio connection. (p. 43)

ŶPC menu setting (changed as desired)

•To make settings “How to Use Menu Functions” to (p. 22)

Menu

Item

Adjustments / Configurations (options)

			W/B High R	White balance of bright red area
	Picture		W/B High B	White balance of bright blue area			and
		Settings	Gamma	(S Curve / 2.0 / 2.2 / 2.5)		repeatedly adjusted
		Advanced	W/B Low R	White balance of dark red area
		PC	W/B Low B	White balance of dark blue area
			Reset PC	Press the OK button to reset to the default Picture settings
			Settings
			Input	Switches to a wide view
				VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
			Resolution	•XGA (1,024 × 768 pixels), WXGA (1,366 × 768 pixels)
				•Options change depending on signals
			Clock	Set to the minimum level if noise occurs
			H-pos	Adjusts horizontal position
	Setup	PC
			V-pos	Adjusts vertical position
		Setup
				Eliminates fl icker and distortion
			Clock Phase	•Adjust after Clock adjustment	•Set to the minimum level if noise occurs
			Sync	PC sync signal type (H & V / SOG)
				H & V : Horizontal and Vertical sync from your PC (Most common sync format)
				•SOG : Sync on Green sync from your PC
			Reset PC	Press the OK button to reset to the default Setup settings
			Settings
34
	•Other	items p. 24 and p. 25