Panasonic TH-46PZ800A, TH-50PZ800A Update TV’s software system, System Update, Region Select

Update

TV’s software system

System

Update

Download new software to TV.

•For detailsp. 44

If System Update is performed, the software will be updated (it may change TV functions). If you do not wish to do so, set “Auto Update Search in Standby” to Off.

Select “Auto Update Search in Standby” and then set “On” or “Off”

System Update			On: Automatically performs
Auto Update Search in Standby		set	•a search in standby and
	On
System Update Search Now		select	downloads an update, if any
			software updates are available

Note

•When the TV is switched to standby, there will be a clicking sound after a short delay. Similar clicking sounds will also occur at 3:00 AM and 5:00 AM (p. 44) when “Auto update Search in Standby” is set to “On”. These sounds are normal.

ŶTo update immediately

Select

“System Update Search Now”

start

select

Searches for an update (for several mins.) and displays a corresponding message if any

Download

•Download may take for about 20 mins.

Note

•During downloading, the TV will display a blank screen for 40 to 50 seconds. Do not interrupt the TV during this procedure.

•DVB Settings (DVB)

Adjust the standard time

Region

Select

Adjust for Summer Time

Daylight

Saving Time

Select the region where you live to adjust the standard time.

•The time contained in the broadcast signal is UTC (Universal Time coordinated) formally known as GMT (Greenwich Mean Time).

Select time offset from the standard time for Summer Time.

•Normally select “Auto”.

•If there is a gap between displayed time and actual time, set this function.

Region	Standard time		Daylight Saving Time: Auto
			(During Summer Time)
NSW / ACT	+10:00		+11:00
Victoria
Queensland		+10:00
South Australia	+9:30		+10:30
Western Australia	+8:00		+9:00
Northern Territory		+9:30
Tasmania	+10:00		+11:00
			(Based on GMT)

Advanced

27