Panasonic TH-50PZ800A, TH-46PZ800A Maintenance, Display panel, Cabinet, Pedestal, Mains plug

Models: TH-46PZ800A TH-42PZ800A TH-50PZ800A

1 52
Download 52 pages 22.56 Kb
Page 6
Image 6
ŶWhen cleaning the TV, remove the mains plug

Caution

ŶWhen cleaning the TV, remove the mains plug

Cleaning an energized TV may cause electrical shock.

ŶWhen the TV is not going to be used for a long period of time, remove the mains plug

This TV will still consume some power even in the Off mode, as long as the mains plug is still connected to a live socket outlet.

ŶTransport only in upright position

Transporting the TV with its display panel facing upright or downward may cause damage to the internal circuitry.

ŶAllow sufficient space around the TV for radiated heat

Minimum distance

10

10

10

7

 

 

 

 

 

 

ŶTransport only in upright position (cm)

When using the pedestal, keep the space between the bottom of the TV and the fl oor surface.

In case of using Wall-hanging bracket, follow the manual of it.

ŶDo not block the rear air vents

Blocked ventilation by newspapers, table cloths, curtains, etc. may cause overheating, fi re or electrical shock.

ŶDo not expose your ears to excessive volume from the headphones

Irreversible damage can be caused.

Notes

Do not display a still picture for a long time

This causes the image to remain on the plasma screen (“image retention”).

This is not considered a malfunction and is not covered by the warranty.

Typical still images

Programme number and other logos

Image displayed in “4:3” mode

Video game

Computer image

To prevent image retention, contrast is lowered automatically after a few minutes if no signals are sent or no operations are performed. (p. 47)

ŶAuto power standby function

If no signal is received and no operation is performed in Analogue TV mode for 30 minutes, the TV will automatically go to standby mode.

ŶKeep the TV away from these types of equipment

Electronic equipment

In particular, do not place video equipment near the TV (electromagnetic interference may distort images / sound).

Equipment with an infrared sensor

This TV also emits infrared rays (this may affect operation of other equipment).

Maintenance

First, remove the mains plug from the socket outlet.

Display panel

Regular care: Gently wipe the surface clean of dirt by using a soft cloth.

Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral detergent (1 part detergent to 100 parts water). Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.

Caution

The surface of the display panel has been specially treated and may be easily damaged. Do not tap or scratch the surface with your fi ngernail or other hard object.

Take care not to subject the surface to insect repellent, solvent, thinner, or other volatile substances (this may degrade surface quality).

Cabinet, Pedestal

Regular care: Wipe the surface clean using a soft dry cloth.

Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent. Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.

Caution

Take care not to subject the TV's surfaces to detergent. (A liquid inside the TV could lead to product failure.)

Take care not to subject surfaces to insect repellent, solvent, thinner, or other volatile substances (this may deteriorate the surface by peeling the paint).

Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time.

Mains plug

Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fi re or electrical shock.)

5

Page 6
Image 6
Panasonic TH-50PZ800A Maintenance, Display panel, Cabinet, Pedestal, Mains plug, ŶTransport only in upright position