Avaya AP-4, AP-6, AP-5 manual IP Address Pool Parameters

DHCP Server Commands

NOTE:

You must have at least one entry in the DHCP Server IP Address Pool Table before you can set the DHCP Server Status (dhcpstatus) to Enable.

IP Address Pool Parameters

Name	Type	Values	Access	CLI Parameter
DHCP Server IP	Table	N/A	R	dhcpippooltbl
Address Pool Table
Table Index	Integer	User Defined	N/A	index
Start IP Address	IpAddress	User Defined	RW	startipaddr
End IP Address	IpAddress	User Defined	RW	endipaddr
Width	Integer	User Defined	RW	width
Default Lease Time	Integer32	3600–	RW	defleasetm
(optional)		86400 sec
		(default)
Maximum Lease	Integer32	3600–	RW	maxleasetm
Time (optional)		86400 sec
		(default)
Comment (optional)	DisplayString	User Defined	RW	cmt
Status (optional)	Integer	enable (1)	RW	status
		disable (2)
		delete (3)

A-44 Avaya Wireless AP-4/5/6 User’s Guide