Filtering
Avaya Wireless AP-4 /5/6 User’s Guide 4-93
Advanced
You can configure the following advanced filtering options:
• Enable Proxy ARP: Place a check mark in the box provided to allow
the Access Point to respond to Address Resolution Protocol (ARP)
requests for wireless clients. When enabled, the AP answers ARP
requests for wireless stations without actually forwarding them to
the wireless network. If disabled, the Access Point will bridge ARP
requests for wireless clients to the wireless LAN.
• Enable IP/ARP Filtering: Place a check mark in the box provided
to allow IP/ARP filtering based on the IP/ARP Filtering Address and
IP Mask. Leave the box unchecked to prevent filtering. If enabled,
you should also configure the IP/ARP Filtering Address and IP/ARP
IP Mask.
— IP/ARP Filtering Address: Enter the Network filtering IP
Address.
— IP/ARP IP Mask: Enter the Network Mask IP Address.
The following protocols are listed in the Advanced Filter Table:
• Deny IPX RIP
• Deny IPX SAP
• Deny IPX LSP
• Deny IP Broadcasts
• Deny IP Multicasts