Avaya AP-4, AP-6, AP-5 manual 802.11b Wireless Interface Commands, Autochannel Select ACS

802.11b Wireless Interface Commands

Perform the following commands to enable TX Power Control and set the transmit power level:

[Device-Name]>set txpowercontrol enable

[Device-Name]>set wif <interface number> currenttxpowerlevel <value>

Allowed values are: 1 (100%), 2 (50%), 3 (25%), 4 (12.5%)

Autochannel Select (ACS)

ACS is enabled by default. Reboot after disabling or enabling ACS.

[Device-Name]>set wif <index> autochannel <enable/disable>

[Device-Name]> reboot 0

Enable/Disable Closed System

[Device-Name]>set wif <index> closedsys <enable/disable>

802.11b Wireless Interface Commands

The wireless interface group parameter is wif. For Single-radio APs, the wireless interface uses table index 3.

See Interfaces for information on these parameters.

Jack--Why are mode and tx power control not in the tables?

Avaya Wireless AP-4/5/6 User’s Guide A-107