Network

You can configure and view the following parameters within the DHCP Server Configuration screen:

Parameter

Description

 

 

 

 

 

 

Enable DHCP

 

Place a check mark in the box provided to

Server

 

enable DHCP Server functionality.

 

 

 

NOTE:

 

 

 

 

 

 

 

 

 

You cannot enable the DHCP Server

 

 

 

functionality unless there is at least one

 

 

 

IP Pool Table Entry configured.

 

 

 

Subnet Mask

 

This field is read-only and reports the

 

 

Access Point’s current subnet mask. DHCP

 

 

clients that receive dynamic addresses from

 

 

the AP will be assigned this same subnet

 

 

mask.

 

 

 

Gateway IP

 

The AP will assign the specified address to

Address

 

its DHCP clients.

 

 

 

Primary DNS IP

 

The AP will assign the specified address to

Address

 

its DHCP clients.

 

 

 

Secondary DNS IP

 

The AP will assign the specified address to

Address

 

its DHCP clients.

 

 

 

 

 

 

 

 

 

 

 

1 of 4

 

 

 

 

Avaya Wireless AP-4/5/6 User’s Guide

4-15

Page 113
Image 113
Avaya AP-5, AP-4, AP-6 manual Parameter Description