Avaya AP-4, AP-6, AP-5 manual Enter only the following statements, Example

Recovery Procedures

7. Enter only the following statements:

[Device-Name]>set ipaddrtype static [Device-Name]>set ipaddr <Access Point IP Address> [Device-Name]>set ipsubmask <IP Mask> [Device-Name]>set tftpipaddr <TFTP Server IP Address> [Device-Name]>set tftpfilename <AP Image File Name, including file extension>

[Device-Name]>set ipgw <Gateway IP Address> [Device-Name]>show ip (to confirm your new settings) [Device-Name]>show tftp (to confirm your new settings) [Device-Name]>reboot 0

Example:

[Device-Name]>set ipaddrtype static [Device-Name]>set ipaddr 10.0.0.12 [Device-Name]>set ipsubmask 255.255.255.0 [Device-Name]>set tftpipaddr 10.0.0.20 [Device-Name]>set tftpfilename MyImage.bin [Device-Name]>set ipgw 10.0.0.30 [Device-Name]>show ip

[Device-Name]> show tftp [Device-Name]> reboot 0

Result: The AP will reboot and then download the image file. You should see downloading activity begin after a few seconds within the TFTP server’s status screen.

8.When the download process is complete, configure the AP as described in Getting Started and Advanced Configuration.

Avaya Wireless AP-4/5/6 User’s Guide 7-23