Avaya AP-5, AP-4, AP-6 manual Wpa

Security

Interface's Configure > SSID/VLAN/Security Mode/Wireless A/B screen and describes how each of these options correspond to the six Security Modes listed above:

Authentication Mode	Authentication	Encryption Method
Setting	Method Employed	Employed
None	None	None or manually
		configured Static WEP
		settings
802.1x	802.1x	Dynamic WEP Keying
Mixed	802.1x or None	Dynamic WEP Keying
	(depends on a client's	or Static WEP
	configuration)	(depends on client's
		configuration)
WPA	802.1x	Dynamic TKIP Keying
WPA-PSK	Manually configured	Dynamic TKIP Keying
	Pre-shared Key

NOTE:

Before enabling the 802.1x, Mixed, or WPA mode, the 802.1x server should be configured. Set the encryption key in Mixed mode after the authentication is set to Mixed mode.

Avaya Wireless AP-4/5/6 User’s Guide 4-129